ibaye Screen Replacement Touch Digitizer Compatible iPhone 6S White Glass Display LCD Assembly with Facing Proximity Sensor Front Camera Ear Speaker+ Repair Tool Kits

Description

Note:
*This part does include , front facing camera, earpiece speaker, and the LCD shield plate.
*You will not need to transfer these parts from your old display assembly to your new part.
*The iPhone 6s digitizer full assembly is WITHOUT home button, allowing you swap the original one to the new screen to keep the touch ID function. Any third-party screens or home buttons have no touch ID.
*When removing the screen, it is highly recommended to use a blow dryer to heat the edges which helps to separate the screen from the seal.

Fix Kit Contents:
1 * LCD Screen
1 * 8 in one Iphone Boot tool
1 * Nano Protective Film

Compatibility:
*All iPhone 6S (Not iPhone 6)
Instruction:

*Please search “Replace iPhone 6s Screen” on YouTube for a video instruction of how to do the replacement.

FAQ:
Q: Plugged the new screen in and it doesn’t work?
A: When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank
screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone.

Q: Don’t power up when fitted to iPhone 6s?
A: Mark down all the screws you remove while disassembled the screen, incorrect placement of these screws during reassembly
will cause permanent damage to your iPhone’s logic board.
*Please search “Replace iPhone 6S Screen” on YouTube for a video instruction of how to do the replacement.
We offer almost all parts for all your Tech device’s needs or wants. If you have any enquiries or need help in fitting the part,
please do not hesitate to contact us by sending us a message via Amazon we aim to reply within 24 hours.